Skip to Content

Technical Specifications

General Specifications
Print technology Piezo electric Drop On Demand inkjet
Maximum print width 18.67" (474 mm)
Ink / Supplies Water-based dye inks, four color process (CMYK).
Optional water-based pigment dyes are also available.
Resolution 100 N/W, 300N/W System: 600 x 600 dpi 150N/W, 500N/W System: 600 x 360 dpi1
Speed 100N/W, 300N/W System: 246 fpm (75 mpm) 2
150 N/W, 500N/W System: 410 fpm (125 mpm) 3
Pre-post options Open architecture, slack web
  • Roll-to-sheet
  • Roll-to-fold
  • Roll-to-roll
Processing options Punch/Perf, selective perforation
Paper handling 20.5" max web (520 mm)
Substrates Compatible with a variety of substrates including inkjet treated and coated papers, and newsprint
Paper weight range 16-42 lb. bond (60-160 gsm) and 45-48.8 gsm (newsprint)
For applications requiring substrates above 32 lb. bond (120 gsm), please consult with your representative from Kodak
Controller options KODAK 700 Print Manager
KODAK CS410 System Controller
Environmental operating ranges
Temperature: 68°F - 78°F (20°C - 26°C)
Relative humidity: 40%-60%, non-condensing
Heat output: 113,500 BTU/hr @ 50% dryer duty cycle
Audible noise: less than 78 dB(A)
Altitude: For locations above 3,000 feet (914 meters), please contact your local Kodak representative to arrange a site evaluation.
Power source
Printer Three phase 480VAC @ 125 Amp 60 Hz
Three phase 400VAC @ 180 Amp 50 Hz
Controller Single phase 200 - 240 V, 12 A
Dimensions
Height 6.75 ft. (2,057 mm)
Length 12.4 ft (3,780 mm)
Depth 7.25 ft. (2,210 mm)
Weight
Printing unit (Preliminary — not to exceed) 8,500 lb. (3,856 kg)
Pad weight 8 pads @ 1,063 lb. (482 kg)

1 Also capable of running at 246 fpm (75 mpm) with resolution of 600 x 600 dpi

2 100N/W System is a monochrome printing system; 300N/W System is a full color printing system

3 150N/W System is a monochrome printing system; 500N/W System is a full color printing system