Long Sheet Deep Pile Feeder

TPF-550 1000

TPF-550 1200

Press compatibility

Available for KODAK NEXFINITY Digital Press and KODAK NEXPRESS ZX, SX, SE, S and Photo Digital Presses

Key features

• Patented BDT Tornado technology for media separation, lift and transport
• Double sheet detector

Front end software requirement

KODAK NEXPRESS System 15.2 or higher

KODAK NEXPRESS System 18.0 or higher

Substrate weight

• Coated: 20 lb. bond to 130 lb. cover (80 - 530 gsm)^*
• Uncoated: 16 lb. bond to 130 lb. cover (60 - 530 gsm)^**

Substrate size (With Short Bridge)

NEXFINITY; NEXPRESS SE, SX and ZX Presses

• Length: 10.1 in. - 31.1 in. (257.5 mm - 791 mm) ^†
• Width: 11 in. - 14 in. (279 mm - 356 mm) 83 ppm NEXPRESS ECO2500 Press
• Length: 16.5 in. - 26 in. (420 mm - 661 mm)
• Width: 11 in. - 14 in. (279 mm - 356 mm)

Substrate size
(With 1 meter/ Long Bridge)

39.37 in. (1 m) configuration

• Length: 18.4 in. - 39.37 in. (467 mm - 1000 mm) ^†
• Width: 11 in. - 14 in. (279 mm - 356 mm)

Substrate size (With Active Bridge)

39.37 in. (1 m) configuration

• Length: 9.5 in. - 39.37 in. (241 mm - 1000 mm) ^†
• Width: 11 in. - 14 in. (279 mm - 356 mm)

48 in. (1.22 m) configuration

• Length: 9.5 in. - 48 in. (241 mm - 1219 mm) ^†
• Width: 11 in. - 14 in. (279 mm - 356 mm)

Pile height

22.44 in. (570 mm)

Sheet capacity

5,700 sheets based on 100 gsm paper

Dimensions

Based on maximum sheet size enabled:

• 50.5 x 55 x 54 in. (128 x 140 x 137 cm) for 30.5 in. (776 mm)
• 61.5 x 55 x 54 in. (156 x 140 x 137 cm) for 39.37 in. (1000 mm)
• 104 x 55 x 54 in. (263 x 140 x 137 cm) for 48 in. (1219 mm)

Approximate net weight

870 lb. (395 kg)

1431 lb. (519 kg)

Electrical requirements

200-240V Single Phase 50/60 Hz Fused 20 A supply; 400V 3 phase 50 Hz with neutral Fused 20 A supply

Environmental conditions

Temperature: 65-75˚F (18-23˚C); Humidity: 20-50%