Skip to Content

KODAK 3D Printing Filament Nylon 12

Polyamide 12


  • Extremely tough with superior tensile strength, elongation at break & impact strength, high fatigue endurance and low friction coefficient.
  • Very low moisture absorption before and after printing.
  • Superior chemical and UV resistance.
  • High heat resistance (over 120°C).
  • Very low warping.

Main application:

Ultra high-resistance functional parts.



Ideal material for durable parts, Nylon 12 is the best choice for printing high-stress working mechanisms. It is less hygroscopic than Nylon 6 and extremely stable both thermically and chemically. It shows excellent physical properties, such as flexibility in thin walls and superior resistance.

Do not use in direct contact with food.


Recommended printer settings

Print temperature: 225°C +/- 5°C.
Print bed temperature: 115°C.
Fans: on.
Closed environment: not required.




Diameter tolerance

Roundness accuracy

Moisture content

1.75 mm

+/- 0.02 mm


< 0.02%

2.85 mm

+/- 0.03 mm


Physical properties



Test method


1.03 g/cm3

ISO 1183/B

Melt Mass-Flow Rate (MFR) (220ᵒC/10kg)

38 g/10 min

ISO 1133


Related Products