Take Pictures Further
Service and Support
Service & Support Main | Ektagraphic Support | Manual Contents |  Previous |  Next

KODAK EKTAGRAPHIC III Slide Projectors
Operating Manual

Condenser Lens

You can clean the condenser lens in place, or by pulling it out. Wear gloves to prevent fingerprints.

Heat-Absorbing Glass
(Models without KODAK Extra Bright Lamp Module)

Caution Caution
The heat-absorbing glass is fragile. Handle it only when cool.

The heat-absorbing glass easily removes for cleaning.

Clean both sides of the condenser lens and the heat-absorbing glass with a soft, lint-free cloth.

Do not leave fingerprints. Replace the lens and heat-absorbing glass to their original locations.


Previous |  Next

Operating Manual Contents

| Important Safety Instructions | Overview | Introduction & Operation/Startup | Slide Tray | Projecting Your Slides | Editing Your Presentations | Clearing a Gate Jam | Using the Built-In Viewer | Using a Disolve Control | Shutdown | Maintenance | Changing the Projection Lamp | Cleaning the Condenser, Heat-Absorbing Glass, and Mirror | Troubleshooting | Warranty | How to Obtain Service | Special-Application Receptacle Identification Chart