Take Pictures Further
Service and Support
Service & Support Main | Ektagraphic Support | Manual Contents |  Previous |  Next

KODAK EKTAGRAPHIC III Slide Projectors
Operating Manual

Editing Your Presentation

Removing the
Lock Ring

To add or remove slides in the tray, you must first remove the lock ring. Turn the ring counterclockwise and lift off.

Removing a Slide

Rotate the tray to the slide you wish to remove. Firmly press and hold down the select bar to eject the slide.

Adding a Slide

When the lock ring is off, you can add a slide to any empty slot. (See Front-Screen Projection.) 

Replace and secure the lock ring.


Previous |  Next

Operating Manual Contents

| Important Safety Instructions | Overview | Introduction & Operation/Startup | Slide Tray | Projecting Your Slides | Editing Your Presentations | Clearing a Gate Jam | Using the Built-In Viewer | Using a Disolve Control | Shutdown | Maintenance | Changing the Projection Lamp | Cleaning the Condenser, Heat-Absorbing Glass, and Mirror | Troubleshooting | Warranty | How to Obtain Service | Special-Application Receptacle Identification Chart