Take Pictures Further
Service and Support
Service & Support Main | Ektagraphic Support | Manual Contents |  Previous |  Next

Operating Manual

Forward and Reverse

Press the forward button on the projector or the remote control to project the first slide. To change slides, briefly press the forward or reverse buttons.


Focus your first slide using the focus knob on the projector or the focus button on the remote control.

(Models A, AMT, and ATS only)

With autofocus on, the projector automatically focuses each slide, after you focus your first slide manually. Turn autofocus off if glass slides make the autofocus motor run continuously.

Random Projection

For random projection of any slide in the tray:

  • press and hold down the select bar,
  • rotate the tray to the desired slide, and
  • release the select bar.

Previous |  Next

Operating Manual Contents

| Important Safety Instructions | Overview | Introduction & Operation/Startup | Slide Tray | Projecting Your Slides | Editing Your Presentations | Clearing a Gate Jam | Using the Built-In Viewer | Using a Disolve Control | Shutdown | Maintenance | Changing the Projection Lamp | Cleaning the Condenser, Heat-Absorbing Glass, and Mirror | Troubleshooting | Warranty | How to Obtain Service | Special-Application Receptacle Identification Chart