Take Pictures Further
Service and Support
Service & Support Main |  Operating Manual Contents |  Carousel Support |  Previous |  Next

KODAK CAROUSEL Slide Projector
Operating Manual

Clearing a Gate Jam

To remove a defective slide or foreign object stuck in the projector gate, you need to remove the tray.

  • Slide the tray release latch in the direction of the arrow, and
  • with your other hand, lift off the back of the tray.

0

0


With the lock ring firmly in place, turn the 140-slide tray upside down. Retract the tray release latch in the direction of the arrow and align the index hole with the index notch. (For an 80-slide tray, rotate the metal plate until it locks into position.) Put the tray aside.

Remove the slide or object from the projector gate by pressing the forward button or removing the slide manually.

Remount damaged slides to protect your projector and slides from subsequent damage.

Previous |  Next

Main Table of Contents:
Important Safety Instructions | Introduction | Overview | Operation | Loading Slide Tray | Adding Your Slides | Removing the Tray | Projecting Your Slides | Forward/Reverse and Focus | Light | Slides/Lenses | Curved/Flat-Field Lens and Distance | Editing Your Presentation | Viewer/Lens | Maintenance | Changing Projection Lamp | Cleaning Condenser/Heat-Absorbing Glass/Mirror | Cleaning Continued | Reassembling Lamp Module | Mirror | Troubleshooting | Warranty | How to Obtain Service