KODAK EZ200 Digital Camera
User's Guide
Installing the Software

This chapter describes how to install the software programs included with your camera. See Using the Software, for instructions on how to begin using the software with your camera.

WINDOWS System Requirements

• WINDOWS 98, WINDOWS 2000, WINDOWS ME
• Available USB port
  
  
• Personal computer with a Pentium 266-MHz microprocessor
  (minimum) and a CD-ROM drive
  
  
• Color display monitor with a minimum resolution of 640 x 480
  and 256 colors (16 bit), (high color, 16 bit preferrer)
  
  
• 32 MB or more of available RAM
• 100 MB of available hard disk space

Software Programs

The KODAK EZ200 Software CD includes these software programs:

• KODAK EZ200 Software--allows your camera to communicate with the PC, download pictures from the camera, and use your camera with the other programs listed here.
  
  
• ARCSOFT PHOTOIMPRESSION Software--Edit and enhance your pictures, add special effects, add text and borders, create calendars and invitations, and much more.
  
  
• ARCSOFT VIDEOIMPRESSION Software--create and edit video files.

Installing the Software

You must install the KODAK EZ200 Software before you can download pictures from the camera or use your camera with the software programs included with your camera.

Install the software:

1. Close any open software programs that are running on your computer.
2. Do not connect your camera to the PC until you are prompted to do so in step 5.
3. Place the KODAK EZ200 Software CD into the CD-ROM drive.

   The first install window appears automatically if Auto Play is enabled.

   If the first install window does not appear automatically, select Run from the Start menu. In the Run dialog box, type the drive letter that contains the CD and type :\setup.exe. For example: d:\setup.exe

4. Follow the on-screen instructions to install the software.

   We suggest you install the KODAK EZ200 Software first. You must have the KODAK EZ200 Software installed before you can begin using the camera with your computer and the other software applications. You can install all of the applications from the CD now, or go back at any time and install them later.

5. When prompted, plug the camera into your PC with the provided USB Cable (see Connecting the Camera to Your Computer).

   A series of dialog windows appear indicating that the EZ200 software drivers are being loaded. Follow the on-screen instructions.

6. If prompted, restart the computer when the software installation
   is complete.

Note: While the Installer is automatically loading your software, take a few minutes to fill out and send in the camera product registration card. This allows you to receive information regarding software updates.

Previous |  Next

User's Guide Contents
Main Table of Contents