Take Pictures Further
Service and Support
Service & Support Main |  DC4800 Support |  User's Guide Contents |  Previous |  Next

KODAK DC4800 Zoom Digital Camera
User's Guide
Using a USB Cable Connection

Follow the directions below to connect your camera to your computer (WINDOWS 98 or 2000-based or MACINTOSH) using the USB cable provided with your camera.

When connecting the camera and downloading pictures, the battery is drained at a fast rate, so use the AC adapter when possible.

  1. Plug the appropriate end of the USB cable into the port on your computer marked with the USB symbol.

    If the port is not labeled, see your computer User's Guide for a diagram that illustrates all of the external ports.

  2. Open the door on the side of the camera.

  3. Plug the other end of the USB cable into the camera USB port.

  4. Turn on the camera.


On a WINDOWS-based computer, a window appears showing the contents of the Picture Card.

On a MACINTOSH computer, a camera icon appears on the desktop.

If a message is displayed on your computer stating that you are not connected, refer to the PDF document installed with the software (USB.PDF for PC or Connect.PDF for MACINTOSH), or the online help for troubleshooting information.

To access the pictures on your Picture Card, see Starting KODAK Digital Camera Software.


Previous |  Next


Main Table of Contents
Transferring Pictures To Your Computer:
USB Cable | Starting Software | Locating Pictures on Picture Card | Naming Conventions