Service & Support Main | DC290 Support | Owner's Manual Contents

KODAK DC290 Zoom Digital Camera
User's Guide
Connecting Your Camera

The camera can connect to a computer using the USB cable included with your camera. When connecting the camera, it is a good idea to use the AC Adapter for KODAK DC200 Series Digital Cameras. If you do not have this AC adapter, it is available as an accessory from dealers of KODAK products or from www.kodak.com/go/accessories.

1. Plug the appropriate end of the USB cable into the port on the computer with the
   USB symbol.

   If the port is not labeled, see your computer User's Guide for a diagram that illustrates all of the external ports.

   

2. Open the USB port on the side of the camera.
3. Plug the other end of the USB cable into the port.
4. Set the Mode dial to Connect.
5. Turn on the camera.

   If you are having trouble connecting, refer to the USB.PDF [481 K] document for Windows computers, or the Connect.PDF [383 K] document for Macintosh computers installed with the software, or the online help for troubleshooting information.

Owner's Manual Contents
Main Table of Contents
Connecting Your Camera
Introduction | USB Support on Windows 98 | Connecting | Starting Kodak software | File Naming | Locating Pictures