Service & Support Main | DC220 Support | DC260 Support | Owner's Manual Contents

KODAK DIGITAL SCIENCE™ DC220/DC260 Zoom Camera
Viewing pictures on your TV

The video out feature on the camera allows you to show the pictures from the memory card on your TV.

Note: The camera's LCD is disabled when the camera is attached to the video cable.

To view pictures on a TV:

1. Turn your TV and the camera off.
2. Insert the video output cable into the video out connection on the side of your camera.

   

3. Connect the other end of the cable to the video in connection on your TV.

   Note: To play sound on your TV, use a cable that has two connectors on the TV end. Connect the yellow connector to the video in connection and the white connector to the audio in connection.

4. Turn on the camera and TV.
5. Set the Mode dial to Review.
6. Set the TV to the correct channel for viewing video.

   The pictures that are stored on the memory card appear on the TV screen as they appear on the LCD.

7. Scroll through your pictures using any of the three methods described in the Viewing pictures section.

   Note: If pictures do not appear on the TV, you may need try a different channel or adjust the Video preferences on the camera.

Owner's Manual Contents
Main Table of Contents
Reviewing Pictures
Introduction | Review mode | Viewing pictures | Viewing remaining memory | Marking pictures | Opening albums | Expanding and collapsing | Adding sound | Deleting one picture | Deleting multiple pictures | Sound, bursts, timelapse | Magnifying pictures | Viewing pictures on TV