Service & Support Main | DC240 Support | DC280 Support | Owner's Manual Contents

KODAK DC240/DC280 Zoom Digital Camera
User's Guide
Adjusting the Video Out Signal

You can set your camera so it is compatible with NTSC or PAL video signals. The Video Out feature needs to be set correctly if you plan on running a slide show of the pictures from the camera on a television or video monitor For information on setting up a slide show, see Running a Slide Show on Your Television.

1. Set the Mode dial to Camera Setup.
2. Slide the POWER switch to the right to turn on the camera.

   The main Camera Setup screen appears.

3. Press a button until the icon is highlighted.

   

4. Press the DO-IT button.

   The Video Out screen appears. The current setting is checked ().

5. Press a button until the video out option you want is highlighted.

   

   • NTSC—used in most countries except Europe. The United States uses NTSC.
   • PAL—used in European countries.
   
   
   
6. Press the DO-IT button to accept the change and return to the main Camera Setup screen.

Owner's Manual Contents
Main Table of Contents
Personalizing Your Camera
Introduction | Response Beep | Saving Power | Viewing Information | Selecting a Language | Formatting Memory Card | Video Out Signal | Default Settings