Service & Support Main | DC240 Support | DC280 Support | Owner's Manual Contents

KODAK DC240/DC280 Zoom Digital Camera
User's Guide
Running a Slide Show on Your Television

You can view your pictures on the camera LCD, or connect your camera to a television and display your pictures to a large audience using the Slide Show feature. The pictures appear on the television for a period of 1 to 99 seconds, a time you set from the camera. The slide show ends after all the pictures have been shown; or, if you are using an AC adapter specified by Kodak, the slide show continues until you stop it.

1. Set the Mode dial to Review.
2. Slide the POWER switch to the right to turn on the camera.

   The last picture taken appears on the LCD screen.

   

3. Press the MENU button.

   The main Review Menu screen appears.

4. Press a button until the icon is highlighted.
5. Press the DO-IT button.

   

   The Slide Show Interval screen appears.

6. Use the buttons to select the number of seconds you want the pictures to appear on the television.

   If you want to view a slide show on the camera LCD, press the DO-IT to start and stop the slide show.

   

7. Insert the video cable into the video-out port on the side of your camera, and connect the other end of the video cable to the video-in port on the television.
8. Turn on the television.

   You may need to adjust the Video Out setting to NTSC or PAL television signals, see Adjusting the Video Out Signal.

9. Press the DO-IT button to start and stop the slide show.

Owner's Manual Contents
Main Table of Contents
Reviewing Your Pictures
Introduction | Viewing | Magnifying | Printing | Protecting | Deleting | Television Slide Show | Picture Information