Service & Support Main | CAMEO Sharp Focus Support | Owner's Manual Contents

KODAK CAMEO Sharp Focus Camera
Loading the Film

If in sunlight, turn your back to the sun and load the film in the shade of your body.

1. Slide the FILM-DOOR LATCH down to open the FILM DOOR.

   

2. Insert the flat end of the film cartridge over the FILM SPINDLE. Push the other end of the film cartridge down into the FILM CHAMBER until it snaps into place. Do not force it into the film chamber.

   

3. Pull out the film leader until the tip reaches the FILM-LOAD MARK. Lay the film flat between the film-guide rails.

   

   If the end of the film extends past the film-load mark, gently push the excess back into the cartridge.

   

4. Close the film door. The film automatically advances to the first frame and the LCD PANEL displays "1". pictures easy. Do not open the film door after you start taking pictures or you will ruin the film.

   

   Note: If the PICTURE COUNTER on the LCD PANEL blinks "0," the film is not loaded correctly. Open the film door and reload the film.

Owner's Manual Contents
Specifications | Getting to Know Your Camera | Attaching the Camera Strap | Loading the Battery | Loading the Film | Taking Pictures | Taking Flash Pictures | Unloading the Film | Caring for Your Camera | Troubleshooting | Quartz Date & Time Model