KODAK CAMEO Sharp Focus Camera-Troubleshooting

Service and Support
Service & Support Main | CAMEO Sharp Focus Support | Owner's Manual Contents

KODAK CAMEO Sharp Focus Camera
Troubleshooting

What happened	Probable cause	Solution
Camera will not operate	Power off	Press on/off button
	Flash not ready	Wait for the flash-charging indicator on the LCD panel to stop blinking
	Film not loaded	See Loading the Film
	There are no more pictures remaining	Remove the film
	Battery weak, dead, missing, or improperly inserted	Replace or reload the battery; see Loading the Battery
Film does not advance	Battery weak, dead, missing, or improperly inserted	Replace or reload the battery; see Loading the Battery
	Film completely used (LCD panel has steady "0")	See Loading the Film
	Film not loaded properly	See Loading the Film
Film does not rewind	Film did not loaded properly	See Loading the Film
Film does not rewind	Battery weak, dead, missing, or improperly inserted	Replace or reload the battery; see Loading the Battery
LCD panel is blank	Battery weak, dead, missing, or improperly inserted	Replace or reload the battery; see Loading the Battery

If you have any questions about your camera or difficulty in using it, reread the camera manual and check the Troubleshooting section.

If you purchased this camera in the United States and have difficulty that isn't covered in the Troubleshooting section of the camera manual, obtain help from one of these resources:

Take the camera, the film you were using, and any sample prints to your photo dealer.
Call Kodak toll free (in the United States) from 9:00 a.m. to 7:00 p.m. (Eastern Time Zone) Monday through Friday at 1 (800) 242-2424.

KODAK CAMEO Sharp Focus CameraTroubleshooting

KODAK CAMEO Sharp Focus Camera
Troubleshooting