Service & Support Main | CAMEO Motor EX Support | Owner's Manual Contents

KODAK CAMEO SFM/Motor EX Camera
Unloading the Film

After you take the last picture, the film automatically winds back into the film cartridge.

1. Do not open the film door until the camera motor shuts off and the LCD Panel shows "0".
2. After the motor shuts off, open the film door and remove the film cartridge from the camera by putting at the top of the film cartridge with your finger.

   

Using Mid-Roll Rewind

By selecting mid-roll rewind, you can rewind a partially exposed roll of film and remove it from the camera for processing without having to take pictures on the entire roll of film.

1. Press the Mode-Selection Button three times to the mid-roll-rewind position. Make sure the mid-roll-rewind indicator  appears on the LCD Panel.

   

2. Press and hold the shutter button down for three seconds to start the mid-roll rewind. Remove your finger from the shutter button after the rewind operation has started. If you release the shutter button before the three seconds, the camera will return to normal mode and not rewind the film.
3. Do not open the film door until the camera motor shuts off and the LCD Panel shows "0". Closing the lens cover/flash during the mid-roll rewind will not affect the rewinding of the film.

Owner's Manual Contents
Features | Camera Identification | Loading Batteries | Loading Film | Taking Pictures | Flash Pictures | Unloading Film | Camera Care | Troubleshooting | Specifications