KODAK ADVANTIX T70 Zoom Camera, User's Manual

Service & Support Main | Other Manuals | User's Guide Contents | Previous | Next

KODAK ADVANTIX T70 Zoom Camera
User's Manual
Loading the Battery

This camera uses one 3 V lithium KODAK KCR2 Battery (or CR2 equivalent) that supplies power for all camera operations.

Note: For the film door to open, you need to load the battery first.

Note: Before you remove the old battery, turn off the camera by sliding the ON/OFF switch to OFF.

Slide the battery door and lift to open.
Insert the battery into the chamber.
Close the battery door.

Low-battery indicator

Replace the battery when the battery symbol "blinks" in the LCD panel or all indicators in the LCD panel disappear and the shutter button cannot be operated.

Battery tips

Dispose of battery according to local and national regulations.
Keep spare battery with you at all times.
Keep batteries away from children.
Store the battery in its original packaging prior to use.
Remove the battery when you store the camera for an extended time.
Do not use rechargeable batteries.

Caution: Do not put the battery in your pocket or in a container that contains coins or metal objects. If the batteries touch the metal objects, they may short circuit, discharge energy, become hot, or leak.

Do not try to take apart, recharge or short circuit the battery, or subject them to high temperature or fire.

Warning: In the unlikely event that battery fluid leaks onto your skin, rinse immediately with plenty of water. For additional information, contact Kodak Health, Safety and Environment Information in the U.S. at 1-585-722-5151. Customers outside the U.S. can contact their local health care provider.

Warning: In the unlikely event that battery fluid leaks inside the camera, U.S. customers can contact the Kodak Information Center (KIC) at 1-800-242-2424. Customers outside the U.S. can contact their local Kodak Customer Service representative.

Automatic Energy Saving Features

Power shutdown

To conserve battery power, the camera automatically goes to sleep after 2 ½ minutes of nonuse. To wake up the camera, press one of the control buttons, for example the shutter button. Turn off the camera by sliding the ON/OFF switch to OFF to further extend the battery life when not in use.

Previous | Next