KODAK ADVANTIX F350 Auto Camera
User's Guide
Loading the Film

You can load film into the camera with the camera ON or OFF.
Insert the battery into the camera before you load the film.

1. Move the FILM-DOOR LEVER to open the FILM DOOR

   

   The film door will open only when the film chamber is empty or the film in the camera is completely rewound into the film cassette.

2. Insert the film cassette completely into the FILM CHAMBER.

   

   Make sure the Film Status Indicator (FSI) on the film cassette is at  (#1 position) for a new cassette.

   Do not force the film cassette into the film chamber.

3. Close the film door to start the auto-film prewind. The PICTURE COUNTER on the LCD PANEL will display the number of exposures remaining on the film.

   After you close the safety-interlocked film door and the film starts to prewind, you cannot open the door until the film is completely rewound into the film cassette.

Previous |  Next

Main Table of Contents
Regulatory Information | Features | Camera Identification | Attaching the Strap | Loading the Battery | Loading the Film | Taking Pictures | Taking Flash Pictures | Using the Self-Timer | Unloading the Film | Caring for Your Camera | Troubleshooting | Specifications