1. Rotate the film-door lever to open the film door.

   The film door opens only when the film chamber is empty or the film in the camera is completely rewound into the film cassette and the motor stops running.

2. Insert the film cassette completely into the film chamber. Make sure the Film Status Indicator (FSI) on the film cassette is at (#1 position) for a new cassette or at (#2 position) for a partially exposed cassette.

   Do not force the film cassette into the film chamber.

3. Close the film door to start the auto-film advance. The frame counter on the LCD panel shows the number of pictures remaining on the film cassette.

Look for this logo to be certain that the film you buy is made for this camera.

Look for this logo to select a certified photofinising service for developing your film and to assure that you get all the features of the Advanced Photo System.