KODAK ADVANTIX C370/C470 Auto-focus Camera
User's Guide
Loading the Film

You can load film into the camera with the camera on or off.

NOTE: Before you load the film, insert the batteries into the camera.

1. Push the film-door lever to open the film door.

   The film door opens only when the film chamber is empty or when the film in the camera is completely rewound into the film cassette.

2. Insert the film cassette completely into the film chamber.

   

   Make sure the Film Status Indicator (FSI) on the film cassette is at  (#1 position) for a new cassette.

   Do not force the film cassette into the film chamber.

3. Close the film door to start the automatic film advance.

   The picture counter on the LCD panel displays "1."

   After you close the safetyinterlocked film door, you cannot open the door until the film is completely rewound into the film cassette.

Look for this logo to be certain that the film you buy is made for this camera. Look for this logo to select a certified photofinising service for developing your film and to assure that you get all the features of the Advanced Photo System.

Film Status Indicator (FSI)

A highlighted indicator advances from one symbol to another to identify the status of the film inside the cassette.

Previous |  Next

Main Table of Contents
Regulatory Information | Camera Identification | Attaching Strap | Loading Batteries | Loading Film | Taking Pictures | Flash & Picture-Taking Options | Using Self-Timer | Unloading Film | Caring for Camera | Troubleshooting | Specifications