KODAK: ADVANTIX C370/C470 Auto-focus Camera, User's Guide

KODAK ADVANTIX C370/C470 Auto-focus Camera
User's Guide
Getting Started

Loading the batteries

This camera uses 2 AAA-size alkaline KODAK K3A Batteries (or equivalent) that supply power for all camera operations.

Open the battery door
You can remove and replace batteries with the camera on or off.
Insert the batteries into the chamber.
Snap the battery door closed.

NOTE: Insert the batteries into the camera before you load the film.

Low-battery indicator

It’s time to replace the batteries when the battery symbol appears on the LCD panel.

NOTE: When there is film in the camera, remove the old batteries within 30 seconds after you open the battery door or else the picture counter resets to 1.

Battery tips

Dispose of batteries according to local and national regulations.
Remember to keep spare batteries with you at all times.
Read and follow all warnings and instructions supplied by the battery manufacturer.
Keep batteries away from children.
Do not try to take apart, recharge or short circuit the batteries, or subject them to high temperature or fire.
Do not use rechargeable batteries.
Store batteries in their original packaging prior to use.
Remove the batteries from the camera when the camera is not going to be used for an extended length of time.
Replace all batteries with the same brand and grade and as a set at the same time.
In the unlikely event that battery fluid leaks onto your skin, contact Kodak Health, Safety and Environment Information at 1-585-722-5151 in the U.S. Customers outside the U.S. can contact their local health care provider.
In the unlikely event that battery fluid leaks inside the camera, U.S. customers can contact the Kodak Information Center (KIC) at 1-800-242- 2424. Customers outside the U.S. can contact their local Kodak Customer Service representative.

Automatic Energy Saving Feature

Power shut-off

To conserve battery power, the camera automatically goes into a sleep mode after 4 minutes of nonuse. You can press the shutter button or close and reopen the lens cover/flash to awaken the camera. When the camera is not used for an extended time, turn off the camera by closing the lens cover/flash.

Previous | Next