Service & Support Main | ADVANTIX C300 Support | ADVANTIX C400 Support |  User's Guide Contents

KODAK ADVANTIX C300 Auto/C400 Auto Focus Camera
Loading the Film

You can load film into the camera with the camera ON or OFF.

Insert the batteries into the camera before you load the film.

1. Move the FILM-DOOR LEVER to open the FILM DOOR.

   

   • The film door will open only when the film chamber is empty or the film in the camera completely rewound into the film cassette.
2. Insert the film cassette completely into the FILM CHAMBER.

   

   • Make sure the Film Status Indicator (FSI) on the film cassette is at  (#1 position) for a new cassette.
   • Do not force the film cassette into the film chamber.
3. Close the film door to start the auto-film advance. The FRAME COUNTER on the LCD PANEL will display "1".
   • After you close the safety-interlocked film door, you cannot open the door until the film is completely rewound into the film cassette.

Owner's Manual Contents
Regulatory Information | Camera Identification | Attaching the Strap | Loading the Batteries | Loading the Film | Taking Pictures | Taking Flash Pictures | Selecting the Flash and Self-Timer Modes | Unloading the Film | Caring for Your Camera | Troubleshooting | Specifications