Service & Support Main | ADVANTIX 5800MRX Support | Owner's Manual Contents

KODAK ADVANTIX 5800MRX Zoom Camera
Loading the Film

You can load film into the camera with the camera ON or OFF.

1. Turn the camera upside down and slide the FILM-DOOR LATCH to open the FILM DOOR.
   • The FILM DOOR will open only when the FILM CHAMBER is empty or the film in the camera is completely rewound into the film cassette.

             

2. Insert the film cassette completely into the FILM CHAMBER.
   • Make sure the Film Status Indicator (FSI) on the film cassette is at (#1 position) for a new cassette or at (#2 position) for a partially exposed cassette.
   • Do not force the film cassette into the FILM CHAMBER.
3. Close the FILM DOOR to start the auto-film advance. The FRAME COUNTER on the LCD PANEL will show the number of frames remaining on the film cassette.
   • After you close the safety-interlocked FILM DOOR, you cannot open the door until the film is completely rewound into the film cassette.

Owner's Manual Contents
Regulatory Information Features | Camera Identification | Attaching the Strap | Loading the Battery | Loading the Film | Taking Pictures | Taking Flash Pictures | Selecting Flash Modes and the Infinity-Focus Mode | Using the Self-timer | Using the Remote Control | Date and Time Imprinting | Setting the Language | Title Imprinting | Print Quantity Select | Unloading the Film | Caring for Your Camera | Troubleshooting | Specifications