Service & Support Main | ADVANTIX 5800MRX Support | Owner's Manual Contents

KODAK ADVANTIX 5800MRX Zoom Camera
Using the Remote Control

The IR Remote Control RC-3 allows remote camera operation up to 20 ft (6.1 m) away.

1. Place the camera on a tripod (TRIPOD SOCKET) or on another firm support.
2. Press the ENTER BUTTON repeatedly until "REMOTE READY" appears on the TEXT-MESSAGING PANEL.
3. Arrange the camera and subject positions and compose your picture.
4. Point the REMOTE CONTROL toward the front of the camera and press the button on the REMOTE CONTROL. The REMOTE-CONTROL LAMP blinks and the shutter releases after approximately 3 seconds.
   • After you take the picture, the REMOTE CONTROL is canceled.

Changing the remote-control battery

The REMOTE CONTROL uses a 3-volt lithium KODAK KCR2032 Battery (or equivalent). Replace the battery when the button on the REMOTE CONTROL does not release the shutter.

1. Remove the three screws on the back of the cover of the REMOTE CONTROL.
2. Lift the cover and remove the old battery.
3. Insert a new battery (+ side up).
4. Replace the cover and re-attach the screws.

Owner's Manual Contents
Regulatory Information Features | Camera Identification | Attaching the Strap | Loading the Battery | Loading the Film | Taking Pictures | Taking Flash Pictures | Selecting Flash Modes and the Infinity-Focus Mode | Using the Self-timer | Using the Remote Control | Date and Time Imprinting | Setting the Language | Title Imprinting | Print Quantity Select | Unloading the Film | Caring for Your Camera | Troubleshooting | Specifications