Firmware / Software downloads
|
|
DCS Firmware and Host Software for KODAK PROFESSIONAL Digital Cameras
|
|
KODAK PROFESSIONAL DCS Camera Manager |
|
Information for Windows Vista OS
To use KODAK PROFESSSIONAL DCS Camera Manager with the Windows Vista Operating System, you must set the software to run in Windows XP (Service Pack 2) Compatibility Mode. Perform the following steps:
- Download DCS Camera Manager to your computer.
- Double-click the Camera_Manager .exe file.
- Follow the instructions to install the software on your computer.
- Shut down your computer.
- Restart your computer and select Start > All Programs > Kodak > DCS Camera Manager.
- Right-click DCS Camera Manager and select Properties.
- When the DCS Camera Manager Properties box appears:
- Select the Compatibility tab.
- Select Run this program in compatibility mode.
- In the compatibility mode list, select Windows XP (Service Pack 2).
- Click OK.
|
What's New
Features
Supported Cameras
System Requirements
|
|
WINDOWS Installation Notes for V4.2
In order to ensure the correct installation of DCS Camera Manager V4.2 on WINDOWS 2000 and WINDOWS XP Systems, you must uninstall all previous versions first.
If you want to keep V1.4.1 on the same system, it can be re-installed after successfully installing V4.2. If a version of DCS Camera Manager prior to V3.0.1 for WINDOWS Systems was used on your system with the DCS Pro 14n, DCS 7xx series cameras, or DCS Pro Back series digital camera backs, a camera driver update is required to properly operate DCS Camera Manager V4.2. For driver update details, please refer to the IEEE1394ReadMe.pdf file located in the WDMDrivers folder of either your DCS Host Software CD-ROM containing DCS Camera Manager V4.2, or the extracted download file on your hard drive.
|
For the best results with FireWire connectivity and data transmission, it is recommended that you are operating with the latest version of camera firmware. Periodically check the appropriate DCS camera firmware download page to check on the availability of a newer version.
How to Connect the FireWire (IEEE 1394) Cable
|
- Notes:
- DCS Camera Manager V4.2 is not compatible with WINDOWS 98SE, WINDOWS Me, and WINDOWS NT 4.0. Users who are running any of these operating systems should install DCS Camera Manager V1.4.1. DCS Camera Manager V1.4.1 does not support the DCS Pro 14n, DCS Pro 14nx, DCS Pro SLR/n, or DCS Pro SLR/c cameras, and there are no plans to post an update providing that support. If you require tethered support for one of these cameras and are running any of the unsupported operating systems, it is recommended that you upgrade to WINDOWS 2000 Service Pack 2 or newer, or to WINDOWS XP.
DCS Camera Manager V4.2 does not support any Mac OS prior to Mac OS 10.2.8. If you are running a Mac OS version prior to 10.2.8 then you must upgrade to Mac OS 10.2.8 or newer.
|
| What's New in V4.2
|
- Added a Korean installation option
- Mac version built with new KCMS for improved multiple thread handling
- Windows version built with new camera SDKs for improved performance
|
| Features in V4.2
|
DCS Camera Manager can do the following:
- Manage tethered KODAK PROFESSIONAL DCS Digital Cameras and Digital Camera Backs via FireWire.
- Take pictures and view the Preview resolution (except DCS 300, 500, and 600 series cameras).
- Initiate a take picture sequence from the User Interface (except DCS Pro Back 645C).
- Copy images from camera cards to host computer with optional naming and sequence numbering.
- Shoot images into camera memory and copy directly to host computer with optional naming and sequence numbering.
- View and set camera properties.
- Switch between multiple connected cameras.
- Launch KODAK PROFESSIONAL DCS Photo Desk.
- View camera serial number and firmware version.
- View and set camera clock.
|
| Supported Cameras in V4.2
|
| | DCS 315 | DCS Pro Back |
| | DCS 330 | DCS Pro Back Plus |
| | DCS 520 | DCS Pro Back 645C |
| | DCS 560 | DCS Pro Back 645H |
| | DCS 620 | DCS Pro Back 645M |
| | DCS 620x | DCS Pro 14n |
| | DCS 660 | DCS Pro 14nx |
| | DCS 660M | DCS Pro SLR/n |
| | DCS 720x | DCS Pro SLR/c |
| | DCS 760 | |
| | DCS 760M | |
| | SCS 2000 | |
| System Requirements for V4.2
|
MACINTOSH Systems:
- Power PC-based MACINTOSH computer with a G3 or better processor
- Mac OS 10.2.8 or 10.3.2 or newer
- 256 MB of RAM (512 MB recommended)
- 200 MB of free disk space
- Desktop Systems: Built-in IEEE 1394 interface or OHCI compliant IEEE 1394 adapter
- Laptop Systems: Built-in IEEE 1394 interface or OHCI compliant IEEE 1394 PCMCIA adapter
WINDOWS Systems:
- WINDOWS/INTEL PC with a 266 MHz PENTIUM II, Celeron, or compatible processor
- WINDOWS 2000 or WINDOWS XP
- 256 MB of RAM (512 MB recommended)
- 200 MB of free disk space
- Desktop Systems: Built-in IEEE 1394 interface or OHCI compliant IEEE 1394 adapter
- Laptop Systems: Built-in IEEE 1394 interface or OHCI compliant IEEE 1394 PCMCIA adapter
|
|
|
|
|
