KODAK EKTACOLOR Chemicals for Minilab Print Processors

Kodak has worked closely with and supplied all of the main minilab manufacturers with photochemicals for many years. Regardless of your minilab type, Kodak has a chemical system optimized for quality and productivity.

These chemicals are designed for your convenience with short process times and reduced replenishment rates. You'll get a faster first print from startup and reduced volume of effluent.

KODAK EKTACOLOR PRIME Chemicals for Minilabs with Standard Process Times

For minilabs with standard process times, use KODAK EKTACOLOR PRIME, PRIME SP, or PRIME LORR Chemicals for Process RA-4. These chemicals are designed to reduce storage, labor, and processing effluent in mid- to high-volume minilabs.

  • Single-part liquid concentrates
  • Easy mixing and handling
  • Reduced number of mixes, longer lasting replenishers
  • Sizes available to fit your needs
  • With replenishment rate and/or temperature adjustment PRIME LORR Chemicals can also be used in short-cycle processes.

Sell Sheet (PDF)

Processing (Z) Manual:

KODAK EKTACOLOR Chemicals for Process RA-2SM

Kodak's SM chemicals are simple, safe and easy. Clearly marked cartridges can only be loaded onto your minilab in the correct position. There is no chemical mixing, which eliminates the potential for mixing errors that can result in incorrect processing of your customers' films or costly rework of prints.

  • Short cycle time with fast developer and bleach-fix times
  • Faster process cycle than Process RA-4 — obtain prints faster for increased productivity
  • Optimized for all levels of process utilization
  • Process RA-2SM is intended for processing EDGE and ROYAL Papers in minilab processors
  • Specially designed chemical concentrate packages called Processing Units (P1 & P2) install directly on processor and require no mixing of replenishers

Note: KODAK PROFESSIONAL ENDURA Papers are not recommended for use in this cycle.

Sell Sheet (PDF)

Processing (Z) Manual:

KODAK EKTACOLOR Processing Cartridge 111 (PC111) for FUJI FRONTIER Digital Minilabs Paper Processor Models 300 and 500 Series

  • Use in place of FUJI Process CP-48S and CP-49E Processing Cartridges
  • Drop-in cartridge for all models of the FUJI FRONTIER Digital Minilab
  • Requires no changes to equipment or replenishment rates. Simply load the cartridge and continue processing. Each cartridge provides enough developer and bleach-fix to process 111 square metres of paper, or about 7170 4 x 6-inch prints.

Current Information Summary:
CIS-229 (PDF)

EKTACOLOR Rapide Chemicals

Rapid process cycle allows increased production on specific minilabs such as the System 89 DLS Rapide Digital Minilab.

These chemicals are designated by process RA-RC and are available to today in the European, African and Middle Eastern regions.

  • Direct replenishment means no mixing is required
  • 90-second print delivery maximizes processing capability of the System 89 DLS Digital Minilab.

Current Information Summaries:
CIS-252 (PDF)
      Using New KODAK EKTACOLOR Rapide Chemicals in the System 88+ DLS Digital Minilab
CIS-250 (PDF)
      Using New KODAK EKTACOLOR Rapide Chemicals in the System 89 DLS Digital Minilab

Related Technical Information