United States [ change ]
DLS Software & Extras
[top_b2]
[top_b2_title_1]
Download Instructions
1.    Determine which download you want. If you are unsure, read the "Find Out More" information.
2.    Click the radio button for the file you want to download.
3.    Review the "Installation Instructions".
4.    Click Download.
[top_b3]
[wg01_1]
Please Note: KODAK DLS Software and Software Updates support the following languages: English, UK-English, Japanese, French, Italian, German, and Spanish.
Release Notes and on-screen messages shown in KODAK DLS Software Update installers are in English only.
[wg26_1]
[wg26_1_title_1]
Daylight Saving Time and Time Zones Update
v. 1.0
2007-02-14
 
Supported Languages:
English
   DST2007Update.exe34 Kb
Find Out More    Installation Instructions   
[wg26_1_subtitle_1]
About the Daylight Saving Time and Time Zones Update
Purpose
This update addresses changes in the start and end dates for Daylight Saving Time and the addition of time zones in KODAK Products running on MICROSOFT WINDOWS 2000 and WINDOWS XP.
This will be a problem for any KODAK device running WINDOWS 2000 and WINDOWS XP based PCs that rely on its clock to either turn on/off or if it performs a time based function/activity.
United States Beginning in the spring of 2007, the start dates and end dates for daylight saving time (DST) will change to comply with the Energy Policy Act of 2005. DST dates for 2007 in the United States and Canada will start three weeks earlier (2:00 A.M. on the second Sunday in March), and will end one week later (2:00 A.M. on the first Sunday in November).
Canada All provinces in Canada that use daylight saving time have adopted the same changes as the United States.
Mexico Mexico has not adopted the DST changes that were made in the United States. Therefore, separate time zone definitions must be used for Mexico.
Uruquay A new time zone has been created for Montevideo, Uruquay.
Brazil There are different DST dates in Brazil.
Israel There are different DST dates in Israel.
Egypt There are different DST dates in Egypt.
Sri Lanka The local time offset has changed from UTC+6.00 to UTC+5:30.
Australia There are different DST dates in Australia.
[wg27_1]
[wg27_1_title_1]
Update 905
Software Update 905 has been replaced with Software Update 922.
[wg28_1]
[wg28_1_title_1]
Update 922 for Noritsu QSS 2911/2921 with KODAK DLS Software 3.0 LA
v. 922
2006-08-15
 
Supported Languages:
English
   60815922.exe4.0 MB
Find Out More    Installation Instructions   
[wg28_1_subtitle_1]
About Update 922 for Noritsu QSS 2911/2921 with KODAK DLS Software 3.0 LA
Purpose
Software Update 922 replaces Software Update 905. It is not necessary to un-install Software Update 905 if it is already installed. Installing Software Update 905 after installing Update 922 will cause the color management system to use Update 905’s files instead of Update 922’s files. To correct for this condition, un-install both Update 905 and Update 922 in the reverse order in which they were installed and then install Update 922.
This update contains changes to the color management for the NORITSU QSS 2911/2921 DLS Digital Minilabs and the NORITSU QSS-3011/3010 DLS Digital Minilab offering improved color reproduction and updates to the calibration application providing improved robustness when using KODAK EKTACOLOR EDGE Paper and KODAK ROYAL Digital Color Paper.
[wg29_1]
[wg29_1_title_1]
Update 126 for KODAK DLS Software 3.0 LA
v. 126
2005-05-24
 
Supported Languages:
English
 Windows  50524126.exe1.4 MB
Find Out More    Installation Instructions   
[wg29_1_subtitle_1]
About Update 126 for KODAK DLS Software 3.0 LA
Purpose
Software Update 126 corrects a problem created by Software Update 125 that unintentionally prevents programs that rely on the OPCCLI network protocol, from retrieving orders from the DLS System by a KODAK Picture Preview Center (PPC) or KODAK Picture Maker G3 with the optional PPC enabler installed. Update 126 also corrects the same problem when using the Archive Extractor.
[wg30_1]
[wg30_1_title_1]
Update 125 for KODAK DLS Software 3.0 LA
v. 125
2005-03-11
 
Supported Languages:
English
 Windows  50311125.exe12.5 MB
Find Out More    Installation Instructions   
[wg30_1_subtitle_1]
About Update 125 for KODAK DLS Software 3.0 LA
Requirements
Software Update 125 can be installed only on NORITSU QSS-2711/2721 or 2911/2921 Minilabs loaded with KODAK DLS System Management Software 3.0 LA (DLS Software). Software Update 125 requires that Software Update 124 already be installed.
Purpose
Improved performance when using KODAK Picture Maker and KODAK Picture Preview Center to retrieve orders.
Increased ability to receive Network Orders.
Improved network order database.
Added a utility to enable/disable running the KODAK Auto Red Eye Algorithm before manual red eye removal.
Added a utility to compress the KODAK Store-It database.
Corrected a problem that prevented firmware updates to the NORITSU QSS-2911/2921 printer’s Imaging Processing board.
Updated driver for PLEXTOR PX4012 CD-RW replacement drives.
Added a utility to delete old log files and temporary files.
[wg31_1]
[wg31_1_title_1]
Update 124 for KODAK DLS Software 3.0 LA
v. 124
2004-03-18
 
Supported Languages:
English
 Windows  40301124.exe10 MB
Find Out More    Installation Instructions   
[wg31_1_subtitle_1]
About Update 124 for KODAK DLS Software 3.0 LA
Requirements
Software Update 124 can be installed only on the NORITSU QSS 2711/2721 or 2911/2921 loaded with KODAK DLS System Management Software 3.0 LA (DLS Software). Software Update 124 requires that Software Updates 120, 121 and 122 already be installed.
Purpose
Identifies and corrects additional causes for triggering of DMLSCA~1.exe errors.
Corrects a condition where the printer stops printing in the middle of an order with no error messages. Additional error logging has been added that will provide more information needed to assist our software developers in creating future updates for this difficult to duplicate printer communication problem.
[wg32_1]
[wg32_1_title_1]
Update 122 for KODAK DLS Software 3.0 LA
v. 122
2004-02-27
 
Supported Languages:
English
 Windows  40203122.exe14 MB
v. 1.0
2004-02-27
 
Supported Languages:
English
 Windows  DLS_CleanHD.exe143 Kb
Find Out More    Installation Instructions   
[wg32_1_subtitle_1]
About Update 122 for KODAK DLS Software 3.0 LA
Requirements
KODAK DLS Software Update 122 can be installed only on the NORITSU QSS-2711/2721 DLS Digital Minilab or QSS-2911/2921 DLS Digital Minilab loaded with KODAK DLS System Management Software 3.0 LA (DLS Software). Software Update 122 requires that Software Updates 120 and 121 have been installed.
[wg32_1_subtitle_5]
Purpose
Corrects a failure to remove defects from color negative scans when using the Manual Dark Defect Removal tool.
Increases the number of digital images per order from 40 to 100 when using the Digital File input option on the Order / D&P Custom window.
Removes the magenta colorcast visible in some neutral highlight values of prints made with the NORITSU QSS-2911/2921 DLS Digital Minilab.
Improves tone scale rendition for prints made from the NORITSU QSS-2711/2721 DLS Digital Minilab and Noritsu QSS-2911/2921 DLS Digital Minilab. Shadow regions of digital camera images are more accurately reproduced.
Corrects an error in the reproduction of template graphics color for the NORITSU QSS-2711/2721 DLS Digital Minilab.
Addresses the triggering of DMLSCA~1.exe errors.
Addresses a condition where the printer stops printing in the middle of an order with no error messages.
Addresses a MSDE database concern. In some situations, data collected in the MSDE Database was written to the MSDE folder on the C: drive and consumed all free disk space on the C: drive. This Software Update checks for this error and corrects the situation by placing the MSDE Database in the proper location on the U: drive.
Reduces rendering errors and corrects cyan color and density shifts encountered on the Prejudge window. These errors occurred when the Underexposure Correction was disabled on the Image Defaults window. Underexposure Correction must remain enabled on the Image Defaults window.
The following is a revised method to disable the Underexposure Correction:
1.    Shut down the DLS Software.
2.    Launch the Set Underexposure Correction utility: Select Start > Administrative Tools (Common) > DLS System Management Software > Set the Underexposure Correction.
3.    When the DOS command window appears, follow the prompts to set the Underexposure Correction.
4.    Restart the DLS Software.
Note: The Underexposure check box on the Key Operator Image Defaults window must remain selected when using this new method. If you clear this check box, the errors will return.
[wg33_1]
[wg33_1_title_1]
Update 121 for KODAK DLS Software LA 3.0
v. 121
2003-10-23
 
Supported Languages:
English
 Windows  30625121.exe22.5 MB
Find Out More    Installation Instructions   
[wg33_1_subtitle_1]
About Update 121 for KODAK DLS Software LA 3.0
Software Update #121 has been re-released to correct a time-out condition that occurred with some systems. The installer now notifies you that an update to the order manager database could take 10 minutes or more.
1.    If you think the earlier release of Software Update #121 (dated September 5, 2003) has been installed on your system:
Select Start > Settings > Control Panel > Add/Remove Programs.
If "KODAK DLS SW-Update 121, 25JUN03" appears in the "Currently installed programs" list, select it, select Change/Remove, and then select OK.
2.    Install the newer release of Software Update #121, available from the link on this page.
[wg33_1_subtitle_5]
Purpose
Software Update #121 for DLS LA Version 3.0 provides numerous enhancements and improvements. This update applies to all Noritsu DLS 27xx/29xx systems running version 3.0 LA software.
IMPORTANT! Please read the information below prior to installation.
Plan time for new paper calibrations after your Update 121 installation.
After installing Update #121, remember to use the DLS Backup & Restore Software to create a new backup. It's important to be aware that restoring registry data or files into the "C:\Program Files\Kodak\Minilab" folders from backups which were made before installing a DLS software update, may cause unpredictable reliability.
[wg33_1_subtitle_10]
Improvements
Reduces errors that occurr when selecting Start on a digital order or toggling between DLS screens.
Resolves a tolerance error when calibrating paper on the NORITSU QSS-2911/2912 printers.
New input and output profiles improve neutral gray scale image quality.
A new 29 series printer profile improves image quality.
Prevents Noise Reduction Algorithm (NRA) from being disabled when editing an image in the preview screen.
Removes artifacts exhibited on Color Negative prints that are made from Archive.
Sharpens 5 x 7 prints to match the appearance of other print sizes.
Removes the magenta cast on the edge of 12R packaged prints produced by the NORITSU QSS-2911/2921 printers.
Reduces KODAK Picture Center Online upload failures that occurr when the previous upload order had problems.
Updates the Japanese "It's a girl" template.
Reduces green highlights in exported images from digital input files.
Optimizes the purging of Lifetime Order Manager database records to reclaim hard drive space and reduce the occurrence of startup errors.
Corrects edit screen reset function after applying several image contrast adjustments.
Prevents checksum errors when using the ScanDiag application to export scanner NVMEM.
Includes a "Set Threshold" utility batch file that gives the choice to modify your overall system productivity in exchange for a higher professional standard, when needed to satisfy your customer's expectations.
[wg34_1]
[wg34_1_title_1]
KODAK DLS Software Update 120
v. 120
2003-02-14
 
Supported Languages:
English
 Windows  30214120_Update120.exe8.32 MB
Find Out More    Installation Instructions   
[wg34_1_subtitle_1]
About KODAK DLS Software Update 120
[wg34_1_subtitle_3]
Purpose
Software Update 120 has been issued to provide the following enhancements and/or fixes to KODAK DLS System Management Software 3.0 LA for the NORITSU QSS-2711/2721 and QSS-2911/2921 DLS Minilabs:
Improved ability to locate the area of Red Eyes using the automatic function.
Fixed Dr Watson error caused by the IDM1.exe file.
Fixed a memory leak if a flatbed scanner is used with the QSS-29x1 printer.
Resolved a sticky printer error message with the QSS-29x1 printer.
Installed an improved sRGB color profile used by both digital and creative prints.
Add batch file to set the default magnification for the Auto Slide Stacker Gate (AMC) Instructions for its use will follow in a Technical Information Bulletin.
Updated the file printchoiceslist.txt for Japanese Remote Digital Input Module (DIM) to resolve problems when selecting "82.5X117 (3.25X4.625)" or "210X296 (8.25X11.675)". After installing this update, copy "C:\Program Files\Kodak\Minilab\printchoiceslist.txt" and overwrite this .TXT file in other PCs loaded with the Japanese Remote DIM application.
[wg35_1]
[wg35_1_title_1]
KODAK DLS Patch 112
v. 112
2002-03-12
 
Supported Languages:
English
 Windows  20321112.exe1.94 MB
Find Out More    Installation Instructions   
[wg35_1_subtitle_1]
About KODAK DLS Patch 112
[wg35_1_subtitle_3]
Purpose
Patch #112 has been issued to provide the following enhancements and/or fixes to KODAK DLS System Management Software Version 2.0 LA (GC4 or GC4a) for NORITSU QSS-2711/21 DLS Minilabs:
Reduction or elimination of Order Queuing errors. Updated versions of HardcopyPrintService files are being installed.
Correct a Dr. Watson error that will occur when rotating an image 90 degrees in the Edit screen. This error occurs only in Japanese versions of DLS System Software. This problem has been corrected by restoring copies of the BeforeFrame.bmp and AfterFrame.bmp files in the WINDOWS TEMP folder after every reboot.
Change the WINDOWS NT System Settings to allow Dr. Watson error information to be saved as part of System or Application event logs. This enhancement will provide easier submission of logs for review by technical support in the event of a recurring crash or freeze. Combining them into one file will allow easier examination and analysis.
To improve the quality of scans of prints from the flatbed scanner a copy of the SM8A32.dll file is now installed in the ScanWizardPro folder. A number of customers who omitted this step when installing the DLS System Software have found the image quality of prints-from-prints were suboptimal.
[wg36_1]
[wg36_1_title_1]
KODAK DLS Patch 111
v. 111
2002-02-22
 
Supported Languages:
English
 Windows  20219111.exe1.58 MB
Find Out More    Installation Instructions   
[wg36_1_subtitle_1]
About KODAK DLS Patch 111
[wg36_1_subtitle_3]
Purpose
Installing this patch protects the IPW computer by preventing an ntoskernel error due to the recursive deletion of critical system files. If an ntoskernel error occurs, you must perform a full system recovery. As a safeguard, this patch checks the deletion to make sure it is not accidentally set to a system path. Recursive deletes on a "protected" system disk are silently denied and logged in the WINDOWS NT application event log.
[wg37_1]
[wg37_1_title_1]
KODAK DLS Patch 110
v. 110
2001-11-14
 
Supported Languages:
English
 Windows  11114110.exe2.73 MB
Find Out More    Installation Instructions   
[wg37_1_subtitle_1]
About KODAK DLS Patch 110
[wg37_1_subtitle_3]
Purpose
This patch updates many items in the DLS software:
The Scanner Firmware Application code has changed from 2.2.9 to 2.3.1. The EPLD Imager Firmware version has been changed from 36 to 38 for the NORITSU SI-1080-II Scanner. These two changes result in improved reliability when downloading new Firmware to the film gates.
The new default settings for the MICROSOFT WINDOWS NT Event Viewer enable service personnel to more quickly identify system problems.
New input profiles, version 14, improve the contrast and flesh tones on prints made from negatives scanned by the NORITSU SI-1080 OR SI-1080-II Film Scanner. Be sure any corrections you may have added to Master Balance are removed. Also any Magazine corrections that may have been added on the MP 1600 should be returned to zero.
A new output profile, version 21, further improves the color management to produce a much more accurate printing of graphics, text and targets that use pure primary colors. No significant change should be observed in normal pictorial images from film or digital cameras.
The vertical and horizontal formats of the English "Grapes and Holly" Template (4XPG208vENG.xml) had the same name. If this template is installed in the folder: X:\Product\Layouts\Holiday Greeting Cards\4xPG208vENG\
The vertically formatted template will be updated and its new name will display as: 4R PG-208v Grapes and Holly-ENG
If the operator has customized their template folders, the operator must manually copy the XML file into any other duplicated folders.
A new menu option backs up the Store-It archive database index file. If an index file problem occurs, a technical support person will be able to assist in restoring your most recent Store-It index file. To access the new menu option "Backup the Store-It Index File", exit the DLS Application. To exit the DLS application, the Key Operator must select the "File" menu item then select "System Administration". This new backup menu option appears in both the "DLS System Management Software" submenu and on WINDOWS NT Desktop. It is a good idea to add this Store-It database index file backup to your normal Shutdown procedures.
The temp folders are cleared during every WINDOWS NT Startup.
When 16-base data is available, prints larger than 4x7 will use the 16-base data. Previously 16-base data was not used unless you printed images larger than 5x7 or zoomed into the image. A document to show the relationship between image data resolution and print size within our software will be available in the Procedures section of this site.
Installs Bar Code Fonts used on Index Prints. If Patch 109 is removed, select the "NO" option for each message asking if you want to remove any fonts.
[wg38_1]
[wg38_1_title_1]
KODAK DLS Patch 108
v. 108
2001-10-11
 
Supported Languages:
English
 Windows  11003108.exe4.8 MB
Find Out More    Installation Instructions   
[wg38_1_subtitle_1]
About KODAK DLS Patch 108
[wg38_1_subtitle_3]
Description
Patch 108 is for NORITSU QSS2711/21 systems with Version 2.0 LA software
This patch improves the sharpening on 120-sized reversal format images scanned with the NORITSU SI-1080II scanner. This patch also gives the operator the added ability to manually adjust the sharpening on each of these images within the Prejudge - Special Filters screen. This patch will only add functionality for systems using the NORITSU SI-1080II Film Scanner.
[wg39_1]
[wg39_1_title_1]
KODAK DLS Patch 107
v. 107
2001-09-28
 
Supported Languages:
English
 Windows  10914107.exe1.3 MB
Find Out More    Installation Instructions   
[wg39_1_subtitle_1]
About KODAK DLS Patch 107
[wg39_1_subtitle_3]
Description
Patch 107 is for NORITSU QSS2711/21 systems with Version 2.0 software
This patch corrects an intermittent problem that occurs when the operator creates a Picture CD on the DLS loaded with international versions of WINDOWS NT. The problem is indicated by a Dr. Watson or an application error message. The problem does not occur with the US English version of WINDOWS NT.
[wg40_1]
[wg40_1_title_1]
Version 1.1A Update CE06
v. CE06
2001-05-18
 
Supported Languages:
English
 Windows  DLSPatchCE06.exe1.15 MB
Find Out More    Installation Instructions   
[wg40_1_subtitle_1]
About Version 1.1A Update CE06
[wg40_1_subtitle_3]
Description
Patch CE06 is for NORITSU QSS2711/21 systems with Version 2.0 or Version 1.1.A_SR1_24 with Mod 2
This patch:
Improves image quality by installing an updated Printer Profile.
Produces significantly smoother and more realistic flesh tones and flesh in the shadows.
Keeps blacks and shadows that have some non-neutral color balance error from becoming severely non-neutral.
Overall contrast and color saturation are similar to the existing profile.