E-mailEmail

close

We're pleased that you want to share this information. To send a link to this page, fill in the information below. The e-mail will show you as the sender and will show your return address.

* indicates required information

* Recipient E-mail:

Each address entered must be valid.
(Separate multiple email addresses with commas. Limited to 5 addresses.)

* Your Name Here:

Enter your name.

* Your E-mail:

Enter a valid address.

send a copy to me
Note: You are not adding recipient email addresses to any promotional email list.

Sending...
Sent!
Send failed. Please try again later.

 Incoming Stream Specification

Incoming Stream Specification  
We realize that each spent solvent stream is unique. The specifications listed below represent guidelines for your initial screening. Please contact us to discuss your specific opportunity.

Recovery of other solvents (including toll recovery to desired specifications) considered on a case-by-case basis.

Incoming Stream Specification 1:
Material Concentration
Acetone any concentration
IPA any concentration
Heptane any concentration
Toluene any concentration
Methanol any concentration
Water any concentration
Other Alcohols < 0.1 wt% each
< 0.5 wt% total
Esters < 1.0 wt% each
< 2.0 wt% total
Ketones (other than acetone), each (sum) < 1.0 wt% each
< 2.0 wt% total
Other Volatile Solvents (< 130°C NBP) < 2.0 wt% each
< 5.0 wt% total
Solids and non-volatile organics (> 130°C NBP) < 5.0 wt% total


Incoming Stream Specification 2:
Material Concentration
Ethyl Acetate any concentration
Water any concentration
Heptane(s) < 0.5 wt% total
Alcohols < 2.0 wt% each
< 5.0 wt% total
Other Volatile Solvents (< 130°C NBP) < 2.0 wt% each
< 5.0 wt% total
Non Volatile Liquids (NBP > 130°C), each (sum) < 5.0 wt% each
< 10.0 wt% total
Solids and non-volatile organics (> 130°C NBP) < 5.0 wt%