E-mailEmail

close

We're pleased that you want to share this information. To send a link to this page, fill in the information below. The e-mail will show you as the sender and will show your return address.

* indicates required information

* Recipient E-mail:

Each address entered must be valid.
(Separate multiple email addresses with commas. Limited to 5 addresses.)

* Your Name Here:

Enter your name.

* Your E-mail:

Enter a valid address.

send a copy to me
Note: You are not adding recipient email addresses to any promotional email list.

Sending...
Sent!
Send failed. Please try again later.

Intermediate Scale Coating Machine


Intermediate Scale Gravure/Slot Die Coater

  • Aqueous and solvent capable
  • 100 to 5000 fpm web speeds
  • Paper and plastic webs 4 to 250 microns thick
  • Minimum solution volumes of 5 gallons required
  • 60’ Air impinged dryer (maximum temperature = 450F)
  • 4 NIR (145 kW) and 1 IR (45 kW) dryers
  • In-line Enercon CDT
  • Metered delivery systems using Zenith, Moyno, or Micro pumps

Multiple coating application techniques:

  • Direct/offset gravure at 9.75”, 13.5”, 16” widths
  • Slot die at 9”,13”,16” widths
  • Spray nozzles (variable widths)
  • Meyer rod and blade at 16” (aqueous only)