We're pleased that you want to share this information. To send a link to this page, fill in the information below. The e-mail will show you as the sender and will show your return address.

* indicates required information

* Recipient E-mail:

Each address entered must be valid.
(Separate multiple email addresses with commas. Limited to 5 addresses.)

* Your Name Here:

Enter your name.

* Your E-mail:

Enter a valid address.

send a copy to me
Note: You are not adding recipient email addresses to any promotional email list.

Sending...

Sent!

Send failed. Please try again later.

Intermediate Scale Extrusion Coater

	Mono and coextrusion (2 or 3 layers)
	Die lip gaps adjustable to your specification
	Cast sheets from 10 to 1000 microns thick
	Coat layers from 1 to 500 microns thick
	Single side lamination
	5 to 800 fpm web speeds
	Maximum of 16” coated width on 17” web
	Paper or plastic carrier webs
	In-line slitting and trim removal
	Interleaving capability
	In-line CDT before and after the coating nip

Available extruders include:

	Egan extruder (20-240 lb/hr)
	PEX extruder (5-60 lb/hr)
	Century in-line compounder (10-30 lb/hr)