E-mailEmail

close

We're pleased that you want to share this information. To send a link to this page, fill in the information below. The e-mail will show you as the sender and will show your return address.

* indicates required information

* Recipient E-mail:

Each address entered must be valid.
(Separate multiple email addresses with commas. Limited to 5 addresses.)

* Your Name Here:

Enter your name.

* Your E-mail:

Enter a valid address.

send a copy to me
Note: You are not adding recipient email addresses to any promotional email list.

Sending...
Sent!
Send failed. Please try again later.

KODAK PRECISION LINE Contact Film UCA7
 

KODAK PRECISION LINE Contact Film UCA7 is designed for making contact phototools from photoplotter output or other line work, producing high image density at line-for-line exposures with minimum pinholes. The matte level on both sides is sufficient to minimize Newton's rings and to provide rapid drawdown in vacuum printing frames.
 
UCA7 Film is a negative working, slow-speed film with ultraviolet sensitivity. Handle it under white fluorescent illumination covered with ultraviolet-absorbing material or in yellow fluorescent illumination. UCA7 Film can be exposed with a high intensity metal halide or pulsed-xenon source. It can be processed in a wide selection of machine developers including lith and rapid-access, and KODAK ULTRALINE Developer and Replenisher.
 
Find out more:
 
 Technical Data