Service & Support Main | DC220 Support | DC260 Support | Owner's Manual Contents
KODAK DIGITAL SCIENCE™ DC220/DC260 Zoom Camera
General maintenance and safety
- To keep from damaging your camera, avoid exposing it to moisture and extreme temperatures.
- Clean the outside of the camera by wiping with a clean, dry cloth. Never use harsh or abrasive cleaners or organic solvents on the camera or any of its parts.
- Never disassemble or touch the inside of the camera. This could result in electrical shock.
- If you notice smoke or a strange smell coming from the camera, immediately turn the camera off, wait a few minutes until the camera cools, and then remove the batteries.
- Cleaning the lens:
- Blow gently on the lens to remove dust and dirt.
- Moisten the lens by breathing lightly on it.
- Wipe the lens gently with a soft, lint-free cloth or an untreated lens-cleaning tissue.
Note: Do not use cleaning solutions unless they are designed specifically for camera lenses. Do not wipe the camera lens with chemically treated eyeglass lens tissue as it may scratch the lens.
Communicating with the computer
If your computer cannot communicate with the camera you may need to adjust the serial port speed setting. Adjust the settings using the Setting camera properties.
Owner's Manual Contents
Main Table of Contents
Tips and Troubleshooting
General maintenance
|
Monitor Adjustment
|
Printing
|
Troubleshooting