Download Scripts from Kodak

Kodak starts you off with a number of pre-loaded scripts to help you get acquainted with using scripts on your DC220, DC260, DC265 and DC290 Zoom Cameras. You can view the source code here, or download the scripts in convenient archives for use with your camera.

Camera Introduction - provides information on the features and capabilities of the DC220, DC260, DC265 and DC290 cameras.
view source

Bracketed Exposure - takes three pictures, automatically or manually, with user defined exposure settings (+/- .5, 1, 1.5 or 2) to ensure that the right exposure is used.
view source

Picture Clarity - sets the resolution and compression settings based upon user-selected input. Choose between highest quality, small print quality, full screen display, small screen display, custom quality or use current image settings.
view source

Resolution Series - lets you see the difference in picture quality with different compression and resolution settings. The camera will automatically capture pictures at all possible setting combinations. (DC220 will capture 6 pictures, the DC260 and DC265 will snap 9 pictures, the DC290 will capture 15 pictures.)
view source

Number of Pictures Remaining
(DC220, DC260 Only) - informs users of how many pictures can be captured on remaining memory card space, based upon the various resolution and compression settings.
view source

Special Exposure Script
(DC290 Only, requires firmware version 1.0.3) - provides additional access to manually setting shutter speeds faster than 0.5 second (shutter speeds of 0.5 second and longer are available via Long Time Exposure mode). Script Readme (PDF format)
view source

To download these scripts, click on the appropriate link for your camera and system (Note: the script files themselves are the same for each system type. They are packaged differently for download convenience):

• WINDOWS Systems:
  • DC220/DC260 Scripts (43K self-extracting EXE)
  • DC265 Scripts (42K self-extracting EXE)
  • DC290 Scripts (44K self-extracting EXE)
• MACINTOSH Systems:
  • DC220/DC260 Scripts (51K self-extracting HQX)
  • DC265 Scripts (48K self-extracting HQX)
  • DC290 Scripts (50K self-extracting HQX)

Once you've downloaded a script follow these steps to install them:

1. Extract the scripts to your computer hard drive. The extraction process will create a folder named "System".
2. Open your COMPACTFLASH Card. You can use a card reader, or (with Windows systems) the Mounter software included on the DC220/DC260/DC265/DC290 CD.
3. If there is no System folder on the card, copy the entire folder named "System" from your hard drive to the card.
   If a System folder already exists, copy the script files (*.csm) to the existing folder.
4. Remove and re-insert the COMPACTFLASH Card in the camera. The new script will appear in the menu system. (You can also power-cycle the camera, but that takes longer.)

If you're looking for other scripts there are a number of good resources across the web.