KODAK Digital Projectors
 
Page 9 of 18
Using the Keypad
spacer While the menus are displayed, the volume, source, and standby buttons on the keypad act as menu navigation buttons when you are using the on-screen menus
spacer Lamp on/off (keypad only) Lamp button

Press the lamp on/off button to turn the lamp on or off. When the lamp is on, the LED lights green. When the lamp is off or the projector is in standby, the LED lights orange.
 

spacer Menu Menu button

Press Menu button to open the on-screen menus (the keypad lights green). Press Menu button again when you are finished using the on-screen menus. When you close the menus, the projector saves any changes you made.
 

spacer Source (keypad only) Computer button or Computer and Video (remote control only)

When you have more than one source (computer and video) connected to the projector, select between them by pressing the source button on the keypad or the Computer or Video button on the remote.
 

spacer Standby Standby button

When you press, Standby buttonthe display and audio turn off and a blank screen is displayed for 15 minutes. The lamp LED on the keypad light orange while the projector is in standby. You can change the amount of time the projector stays in standby mode by adjusting the standby time.
 

spacer Volume (keypad only) Audio button Audio off button
  • To increase the volume, press Audio button
  • To decrease the volume, press Audio off button
Volume adjustments are saved for each source that you have connected.
 

Return to Index 		 
Continue to Using the On-Screen Menus